Insane Diesel
Lorenzo's Oil™ BR-40 SAE 40 Break-In Engine Oil With TS2 Guard™
Lorenzo's Oil™ BR-40 SAE 40 Break-In Engine Oil With TS2 Guard™
Couldn't load pickup availability
Lorenzo's Oil™ BR-40 SAE 40 Break-In Engine Oil With TS2 Guard™
Lorenzo's Oil™ BR-40 is an SAE 40 break-in engine oil formulated to protect new and rebuilt engines during initial startup and the critical engine break-in period.
Its high-zinc and high-phosphorus anti-wear additive system helps promote proper piston ring seating while protecting critical internal engine components, including camshafts, lifters, valve trains, pistons, cylinder walls, and bearings.
BR-40 Break-In Engine Oil is recommended for high-performance engines that require maximum anti-wear protection during break-in. Establishing a proper ring seal helps support compression, horsepower, torque, and long-term engine performance.
Product Details
- Product Type: Break-In Engine Oil
- Formula: BR-40
- SAE Viscosity Grade: SAE 40
- Zinc Content: 3,400 ppm
- Phosphorus Content: 3,100 ppm
- Additive Technology: TS2 Guard™
Recommended For
- Initial startup and break-in of newly built engines
- Initial startup and break-in of rebuilt engines
- High-performance engine applications
- Flat-tappet camshafts and lifters
- Engines requiring high-zinc and high-phosphorus anti-wear protection
Benefits
- Provides critical protection during initial engine startup
- Helps protect internal engine components during break-in
- Helps promote proper piston ring seating
- Provides excellent protection for flat-tappet camshafts and lifters
- Helps establish the ring seal needed to support compression, horsepower, and torque
- Delivers high-zinc and high-phosphorus anti-wear protection
- Includes the additional protective benefits of TS2 Guard™
Technical Specifications
| SAE Viscosity Grade | 40 |
| Specific Gravity at 15.6°C (60°F) | 0.882 |
| Viscosity Index | 100 |
| Pour Point | -26°C (-15°F) |
| Phosphorus | 3,100 ppm |
| Zinc | 3,400 ppm |
| API Gravity | 28.93 |
| Viscosity at 40°C | 146.44 cSt |
| Viscosity at 100°C | 14.78 cSt |
| Flash Point | 225°C (437°F) |
| TBN | 5.5 mg KOH/g |
Engine Break-In Guidance
Follow the engine builder's recommended break-in procedure and oil-change interval. Engine requirements and break-in procedures can vary by engine design, components, and intended application.
Share
